Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: metal halide

  1. #1
    Hi, I'm New Here!
    Join Date
    Feb 2013
    Location
    London
    Posts
    16
    Country: United Kingdom

    metal halide

    Do any of you have opinions on the use of this lamp ?

    www.exo-terra.com/en/products/sunray_bulb.php

    I'm looking to heat my viv from the top, it's 18'' high, and I wanted to provide a natural as possible light/heat source. I know garters don't need uvb etc, but it seems more like real sun.

    I'd really appreciate your help.

    Thanks, stu

  2. #2
    "PM Boots For Custom Title" chris-uk's Avatar
    Join Date
    Sep 2011
    Location
    Midlands
    Posts
    3,477
    Country: United Kingdom

    Re: metal halide

    Personally, I wouldn't use them. They are just so inefficient for my taste - a 70W bulb wouldn't heat the floor of my viv to 32C, sure I could add another basking platform or branches closer to the light but that's not ideal for me. And the temperature halides get to you'd need to prevent the snake getting within around 10cm of it if you don't want to cook it... The stats on ExoTerra website suggest that at 10cm the temp would be 42C, getting closer than that and the temp will rise dangerously.

    When electricity is constantly increasing in price, I can use a 20W heatmat to provide a 50x30cm glass sbelf at 32C with the space under the glass shelf providing a warm hide at around 28C. So I get ideal temps with lighting provided by LED spots and strips, and the heatmat maintaining the platform temperature is turned down off or down to <25% most times when I look at that viv. With no requirement for UV my priority is heating and lighting my garters efficiently, so any type of incandescent bulb is out of favour with me.
    Chris
    T. marcianus, T. e. cuitzeoensis, T. cyrtopsis, T. radix, T. s. infernalis, T. s. tetrataenia

  3. #3
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: metal halide

    I would never use a lamp this intense with any thamnophis species.

    Garter snakes are a cool climate snake, it's all too easy to overheat them. (They hide in shady/cool areas during the hot summer days.)

    That light bulb is made for larger cages with tropical animals inside.

  4. #4
    "Preparing For Second shed" gibble888's Avatar
    Join Date
    Aug 2012
    Location
    pa
    Posts
    218
    Country: United States

    Re: metal halide

    I use 75 watts max and cover the top of the cage with objects to increase temp a little more if needed.

  5. #5
    "Preparing For Second shed" gibble888's Avatar
    Join Date
    Aug 2012
    Location
    pa
    Posts
    218
    Country: United States

    Re: metal halide

    Thats for a 30 gallon

  6. #6
    Hi, I'm New Here!
    Join Date
    Feb 2013
    Location
    London
    Posts
    16
    Country: United Kingdom

    Re: metal halide

    Thanks to all of you for your advice... though a new question now springs to mind:

    Could i just confirm that we are indeed aiming to get the warm end of the enclosure to about 32degC, even though thamnophis may well prefer to hide way from such temps? Is it just to offer the choice to them?


    Btw, I'm due to pick up my first and sole garter from crazy reptiles at Doncaster in September, an orange flame, and I'm just getting my set up sorted out, with your help :-)

  7. #7
    "First shed, A Success" Ruth's Avatar
    Join Date
    Feb 2013
    Location
    March, Cambridgeshire
    Posts
    119
    Country: United Kingdom

    Re: metal halide

    The care sheet says between 22 to 30c My hottest area doesn't go above 30c and my snakes seem happy and digest their food quickly. I too am getting some snakes from crazy reptiles but at kempton. I'm rather excited.

  8. #8
    "PM Boots For Custom Title" chris-uk's Avatar
    Join Date
    Sep 2011
    Location
    Midlands
    Posts
    3,477
    Country: United Kingdom

    Re: metal halide

    32C is pretty much 90F. I aim for 30C on the warm side (cool side is between 18 and 21C), if it gets to 32C I don't worry, anywhere between 28 and 32 is fine and a bit of variation is good in my book. Bear in mind that most of my species are Southern - Texas, California, Mexico. I also turn the heat off completely every night.
    Chris
    T. marcianus, T. e. cuitzeoensis, T. cyrtopsis, T. radix, T. s. infernalis, T. s. tetrataenia

  9. #9
    Hi, I'm New Here!
    Join Date
    Feb 2013
    Location
    London
    Posts
    16
    Country: United Kingdom

    Re: metal halide

    Thanks Chris, and all who've offered their help.

  10. #10
    Thamnophis cymru -MARWOLAETH-'s Avatar
    Join Date
    Mar 2012
    Location
    Swansea (twinned with Mordor), Cymru
    Posts
    1,449
    Country: Wales

    Re: metal halide

    As long as you provide a wide range of temperatures to bask at it wont matter what the temps get to.

    I've got a viv ranging from 35c or slightly higher at the hottest then it slowly goes down to around room temperature at the bottom.
    She will still use the areas that are above her optimal temperature in the morning and after a meal then she's slowly work her way down the wall to room temperature at the bottom where she'll explore her viv or hide away.


    I used the same methods of heating and viv design in this thread which really benefited my garter.Naturalistic Snake Enclosures With Fake Walls - A How To Guide (Pic Heavy) - Reptile Forums
    Will

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •