Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Juvenile snake
    Join Date
    Jun 2010
    Posts
    126
    Country: United States

    Most basic enclosure

    Can you guys post some pics of you most basic set ups. Or the basic breeding setups. thanks guys.

  2. #2
    "Second shed, A Success" Hollis_Steed's Avatar
    Join Date
    May 2010
    Location
    Cache Valley Northern Utah
    Posts
    264
    Country: United States

    Re: Most basic enclosure

    Here is my very basic set up. I bought the aquariums at a local second hand store. Pretty basic
    Attached Images Attached Images
    Jeff

  3. #3
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: Most basic enclosure

    I will dig up photos later....

    The most basic set up, minimal requirements to keep your snake healthy is.

    1. escape proof enclosure - poly tote with locking lid or aquarium with screen top and locking clips.

    2. Substrate - Newspaper, paper towels or if you prefer - Aspen, coconut fiber, bark, pellets, corn cob or cage carpet.

    3. a water bowl, big enough that the snake can climb in if it wants. Dog food bowls with openings on the bottom can double as a hide as well.

    4. a hide - a nice secure place for your snake to chill out and get away from it all.

    5. heat gradient, an UTH at one end or a basking light. Although these are not absolutely necessary, it is the preferred method of many keepers.

    6. Lighting, since garter snakes are diurnal (daytime snakes) they like a nice overhead light to keep it well lit during the daytime.


    Surely other will add to or correct my suggestions.
    then just go from there.

  4. #4
    Juvenile snake
    Join Date
    Jun 2010
    Posts
    126
    Country: United States

    Re: Most basic enclosure

    do the totes work best? I was considering switching mine to a tote. and points on what needs to be done to the tote i.e. air holes, screen? ect?

  5. #5
    Forum Moderator infernalis's Avatar
    Join Date
    Feb 2008
    Location
    Upstate NY
    Posts
    7,920
    Country: United States

    Re: Most basic enclosure

    The most effective way to put air holes in a tote without cracking it, Buy a cheap soldering iron, heat it up and push it through the tote.

    A small row of holes on each side of the tote is all you need.

    also, make sure the lid secures tight, some totes have loose fitting lids, and the snakes can wedge themselves into the crack and either escape or break their own necks.

  6. #6
    Juvenile snake
    Join Date
    Jun 2010
    Posts
    126
    Country: United States

    Re: Most basic enclosure

    Quote Originally Posted by infernalis View Post
    The most effective way to put air holes in a tote without cracking it, Buy a cheap soldering iron, heat it up and push it through the tote.

    A small row of holes on each side of the tote is all you need.

    also, make sure the lid secures tight, some totes have loose fitting lids, and the snakes can wedge themselves into the crack and either escape or break their own necks.

    any pics?

  7. #7
    Banned
    Join Date
    Sep 2009
    Posts
    12,873
    Country: United States

    Re: Most basic enclosure

    Setup for Amy. 10 gallon slide lock reptile tank. Reptibark/coconut fiber "forest mix" type substrate, real dry moss, dollar store plants, the rock looking thing is plastic, hollow, and it's her favorite place, and only hide. Plastic water dish in left rear corner. No lighting for her, she's albino and hates it. I use a 60 watt ceramic heat emitter. You can get these screened tanks in various sizes. I buy them when they appear on craigslist and I never pay more than $1 per gallon. In fact, someone right now is selling 20 gallon's for $15, 10 gallons for $5. I also picked up the dome lights for $5. Most expensive part of this setup is the heat emitter bulb and the remote probe thermometer to monitor the temp in her hide. The setup and decor itself was dirt cheap.


    Got this 55 gallon in trade for a 4 foot pueblan milk snake, paid $30 for the top, $2 for the liner, the log was river driftwood (free), dollar store plants, re-purposed plastic packaging for a water dish. Florescent lamp was $10 at a garage sale and holds 3 X 18-inch tubes. It houses my largest Oregon Red-spotted garters.

    In front of it is a 20 gallon set up in much the same manor, cardboard box for a hide. My smallest snakes (T. ordinoides and 2 subadult T.s.concinnus) live in that one.

    For the non-albino sun-loving snakes, I use ceramic heat emitters and florescents or else I use a full spectrum basking bulb. Bulbs are by far the most expensive thing. Everything else I use was very cheap.


  8. #8
    "Preparing For First shed"
    Join Date
    Apr 2009
    Posts
    64
    Country: United States

    Re: Most basic enclosure

    1) 10 gallon tank with screen lid and lid locking clips.

    2) Dirt substrate with layer of leaves and bark on top
    (there are a wide variety of substrates that will work).

    3) Water dish

    4) Hide area
    (in this case the black plastic box off to the right)

    5) Natural light from window

    6) Undertank heat pad that heats half of hidebox
    (so the snakes can be hidden and either heated or unheated).

    In this enclosure I also have a potted plant, but it's not necessary.

    Tim Spuckler
    Third Eye Herptile Propagation
    www.thirdeyeherp.com

  9. #9
    Banned
    Join Date
    Sep 2009
    Posts
    12,873
    Country: United States

    Re: Most basic enclosure

    Another pic:



    I've looked at expensive enclosures and I really don't care much for them. I actually prefer my cheap, screened glass enclosures. These could easily be enhanced to look really nice by using fir bark substrate and cork bark background or or artificial rock backgrounds and I do intend to do that after the babies are born. Right now I'm using liners which are easy to remove and clean. I'll be housing the babies in plastic totes and/or 10-20 gallon screen top tanks I have in my garage.

  10. #10
    "Third shed, A Success" mtolypetsupply's Avatar
    Join Date
    Sep 2008
    Location
    Toms River, NJ
    Posts
    493
    Country: United States

    Re: Most basic enclosure

    My most basic set ups are the tubs. While cheap, and secure, I do NOT like them for garters at ALL. I much prefer tanks with lids. Due to space constraints, and energy efficiency, the tubs do work out, with a little extra caution.

    Garters are a much more, um, *energetic* snake than many others, and I have had them try to leap out of the tub as soon as I crack open the lids, many times.

    If you are going to use tubs, I suggest:

    1. ONLY ONE snake per tub, no matter how big. That way, if you have one hand on the lid, you have one hand to catch the resident.

    2. Use ONLY ONE hide. You don't want to be looking in multiple hides and have your snake get loose leaping out of the hide you *weren't* looking in.

    3. Use newspaper as a substrate. Loose thick substrate is fun for them, but again, while you're digging through it on one end, they can slither under and leap out the other side.

    4. BE EXTREMELY CAREFUL WITH MAKING HOLES when you have juvies or babies. It's much better to have a zillion small holes that they couldn't possibly fit through, than having one get stuck, or escape through larger holes.

    If I had unlimited room, I'd have enclosures for all of them that not only provide floor space, but climbing space and a pool area. They seem to LOVE to climb, burrow, swim, guess they're truly the athletes of the snake world!

    If you don't have to worry about space, the larger the enclosure, the better, in my opinion. Give them plenty of space and "furniture" in which to hide or on which to climb. Also, enough room in the "pool" to soak and "swim" (ok, wiggling in place isn't exactly swimming, but it's better than a small drinking only bowl).



    Stephi
    check out our new website at
    www.HerpEden.com

Similar Threads

  1. What type of enclosure do you have?
    By Boots in forum Enclosures
    Replies: 31
    Last Post: 01-06-2009, 02:48 PM
  2. Enclosure Pictures
    By abcat1993 in forum Enclosures
    Replies: 68
    Last Post: 10-13-2008, 08:41 PM
  3. Enclosure size
    By Snake_Freak in forum Enclosures
    Replies: 3
    Last Post: 07-07-2007, 05:50 AM
  4. A few general Enclosure and Accessory questions
    By Volksdragon in forum Enclosures
    Replies: 10
    Last Post: 04-25-2007, 02:38 PM
  5. Garter snake enclosure size?
    By Lee in forum Enclosures
    Replies: 30
    Last Post: 04-15-2007, 12:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •