my work in progress

[Stefan-A]

ehh maybe i will like uit more after itas all dressed up..

as for the fans i was thinking of making one sucking air in and one blowing air out, like a wind tunnel sorta thing. right now that fan is set to suck air out and im hoping that with just that little bit of air flow it keeps the air fresh. gunna finish dressing up the inside first and then run a 3 day test without the snake in it, see what the hot and cool side temps will be and all.

If you intend to use fans, I recommend having some form of draft stops and keeping the RPMs very low. If you get that wind tunnel effect, there's always a risk that it's going to cause respiratory problems. But looking at those ventilation holes, I'd say it's not really necessary to add fans.

[Lori P]

It's coming right along! One thing-- remember, the snakes spend most of their time (or at least a lot of it) on the bottom of the tank so you might want to put a temp gauge near the floor. :-)

[NetBSD]

It's coming right along! One thing-- remember, the snakes spend most of their time (or at least a lot of it) on the bottom of the tank so you might want to put a temp gauge near the floor. :-)

already ahead of ya, right inside the door there is one. as for the fan it will have speed control if i decide i need it.

[Garter_Gertie]

I gotta find me an old TV on craigslist... THIS IS JUST TOO AWSOME and so kitch - just the kind'a things I love!

[Stefan-A]

I'm sorry to hear that.

[jitami]

Sorry to hear about little pinky

Try scenting a new frozen/thawed pinky with a salamander. If that works you can just save one of the salamanders in the freezer for scenting and eventually won't even need that. Good luck!

[infernalis]

Sorry to hear that......

[Garter_Gertie]

You did the best you could, Net. I'm sorry it didn't work out with Pinkie.

[Snake lover 3-25]

sorry to hear that